MOULDING, CURING & CIRCULATION
Pouring line
Moves prepared moulds through the listed pouring position.
Compare line configurations
PRODUCTION-LINE CONFIGURATIONS
Configuration options by production line
The highlighted row matches the production line you selected. Final model, dimensions, quantity and power are confirmed during project engineering.
| Production line | Model | Dimensions | Qty. | Unit power | Total |
|---|---|---|---|---|---|
| 30 m³/day → | HLY-07 | 6000 mm per rail | 2 rails | ||
| 100 m³ → | |||||
| 200 m³/day → | JZ-001 | 12,000 × 1100 mm | 1 | 2.2 kW | 2.2 kW |
| 300 m³/day → | JZ-001 | 12,000 × 1100 mm | 1 | 2.2 kW | 2.2 kW |
USED IN THESE PRODUCTION LINES
Return to the corresponding capacity
30 m³/day
HLY-07 · 2 rails
Back to production-line equipment → Lightweight block production100 m³
HDZD · 1
Back to production-line equipment → Lightweight block & wall panel reference200 m³/day
JZ-001 · 1
Back to production-line equipment → High-output lightweight block line300 m³/day
JZ-001 · 1
Back to production-line equipment →SAME PROCESS STAGE
Explore other equipment in moulding, curing & circulation
Compare other equipment used at the same production stage. Final selection depends on the complete line configuration.
Transfer and mould-circulation systems
Covers capacity-specific transfer-cart or mould-circulation sections without merging their models or parameters.
Open equipment detail → Moulding, curing & circulationDemoulding line
Provides powered movement through the listed demoulding station.
Open equipment detail → Moulding, curing & circulationMould return line
Returns empty moulds for cleaning, preparation and the next pouring cycle.
Open equipment detail →Discuss this equipment in a complete production line
Send the target product, planned output, raw materials and project location. HENGDE will match the equipment to the complete factory configuration.