CLC PHYSICAL-FOAMING CAPACITY REFERENCE

50 m³/day CLC block production line reference

An entry-level physical-foaming block-line reference built around feeding, metering, foam preparation, mixing, moulding, combined cutting, transfer and basic controls. Final practical output depends on the product, recipe, shifts and curing rhythm.

Request an initial line review View recent projects
Independent engineeringEquipment manufacturingProject delivery
DOCUMENTED REFERENCE CONFIGURATIONExisting reference data; final equipment and output require project confirmation.
documented equipment used in a connected CLC physical-foaming production-line reference
LUCA SMARTENGINEERED AS ONE SYSTEM
50 m³/dayNominal reference direction
15 named itemsNamed items in existing table
Project-specificFinal output and scope
01
CAPACITY BOUNDARY

Daily output is the result of the complete production rhythm

01

Batch preparation

Metering, foaming and mixing cycle must support the target volume.

02

Mould & curing cycle

Mould quantity, curing positions and demoulding timing limit practical output.

03

Cutting & handling

Cutting, transfer and stacking must accept every cured billet without creating a queue.

04

Shifts & factory conditions

Working hours, labour, utilities, climate and layout change practical daily output.

02
REFERENCE EQUIPMENT LIST

See the named equipment, model, dimensions, power and quantity

This table is retained as existing the documented project team reference data. Re-confirm every row during technical proposal and contract review.

50 m³/day CLC block production line reference — reference only
No.EquipmentModelDimensionsQty.Unit powerListed total
1 Screw feeder HDSL-001 8000 × 350 × 1100 mm 1 11 kW 11 kW
2 Belt conveyor HDPDA-001 9000 × 800 × 800 mm 1 2.2 kW 2.2 kW
3 Powder dosing and weighing HDFL-001 Ø1310 × H1950 mm 1 0.55 kW 0.55 kW
4 Dosing hopper HDSS-001 Ø1000 × H1500 mm 1 0.55 kW 0.55 kW
5 Water dosing system HDSL-001 Ø1100 × H1140 mm 1 0.55 kW 0.55 kW
6 Physical foam generator HDKWF1-001 1150 × 750 × 1140 mm 1 7.5 kW 7.5 kW
7 Piston air compressor HDKY-001 Length 1300 mm; 380 V reference 1 7.5 kW 7.5 kW
8 Horizontal shaft mixer EPSA-1 2000 × 1200 × 1200 mm 1 22 kW 22 kW
9 Gantry horizontal & vertical cutter HDSXZ-01-01 4600 × 3750 × 3800 mm 1 28.8 kW 28.8 kW
10 Concrete block grab / lifter HDEB2-1 1200 × 1500 × 1400 mm 2 — —
11 Manual rail transfer cart HDBAS-001 1500 × 1080 × 40 mm 3 — —
12 PLC control console HDKZ1-001 1300 × 1100 × 400 mm 1 Electrical scope Electrical scope
13 Foam-generator control panel HDCB-001 700 × 500 × 400 mm 1 Electrical scope Electrical scope
14 Remote-control module HDYC-001 200 × 150 × 60 mm 1 Project-specific Project-specific
15 Concrete block mould HDCM1-002 1200 × 1200 × 620 mm 1 — —
03
COMPARE CAPACITIES

Move between the verified reference pages

50 m³/day 01

Entry physical-foaming reference

Review the named core equipment for the existing 50 m³/day table.

 100 m³/day 02

Connected small-factory reference

Review preparation, circulation, cutting, handling and controls.

 200 m³/day 03

High-output block and wall-panel reference

Review all 36 listed equipment and tooling items.
BUYER QUESTIONS

Questions to answer before equipment selection

Does the nominal capacity guarantee the same daily output in every factory?+

No. Product, recipe, curing, mould quantity, cutting, shifts, labour and factory conditions determine practical output.

Is the table a final quotation?+

No. It is an existing reference configuration. The technical proposal and contract must confirm the final model, quantity, functions, power and delivery scope.

SEND YOUR PROJECT INFORMATION

Let engineering review the complete factory need

Tell us the project country, target product, local raw materials, planned output and current project stage.

  • Factory-built equipment
  • Project-specific engineering
  • Overseas installation & operator training
documented equipment used in a connected CLC physical-foaming production-line reference
Product, materials, capacity, factory and timeline

Project details help engineering review the product, process, output and factory need. By submitting, you agree to the Privacy Policy. Fields marked * are required.

NEXT STEP

Start with your product, materials and project location

Engineering can only configure a practical line when the real production conditions are visible.

Request an initial line review