CUTTING & FINISHING
Single-pass rotary horizontal-and-vertical CNC cutter
Performs the two listed cutting directions in the simplified 50 m³ reference.
Compare line configurations
STANDARD EQUIPMENT PARAMETERS
Model, dimensions, power, weight and function
Standard catalogue parameters. Capacity-specific quantity remains in the production-line configuration table below.
| Variant | Model | Dimensions | Rated power | Reference weight | Function |
|---|---|---|---|---|---|
| Single-pass rotary horizontal-and-vertical cutter | HDSXZ-01-01 | 4600 × 3750 × 3800 mm | 28.5 kW | 4200 kg | Cuts one billet up to 1400 × 1200 × 850 mm in the listed configuration. |
Reference parameters describe the listed equipment model. Final interfaces, voltage, quantity and delivered configuration are confirmed in the project quotation and engineering drawings.
PRODUCTION-LINE CONFIGURATIONS
Configuration options by production line
The highlighted row matches the production line you selected. Final model, dimensions, quantity and power are confirmed during project engineering.
| Production line | Model | Dimensions | Qty. | Unit power | Total |
|---|---|---|---|---|---|
| 50 m³/day → | HDSXZ-01-01 | 4600 × 3750 × 3800 | 1 | 28.5 kW | 28.5 kW |
USED IN THESE PRODUCTION LINES
Return to the corresponding capacity
SAME PROCESS STAGE
Explore other equipment in cutting & finishing
Compare other equipment used at the same production stage. Final selection depends on the complete line configuration.
Gantry vertical cutter
Completes the vertical cutting stage in the 100 m³ configuration.
Open equipment detail → Cutting & finishingNine-station horizontal saw
Completes the listed multi-station horizontal cutting operation after the billet reaches the confirmed cutting condition.
Open equipment detail → Cutting & finishingTwin-mould three-station CNC gantry vertical saw
Completes the second cutting direction for the listed twin-mould route.
Open equipment detail →Discuss this equipment in a complete production line
Send the target product, planned output, raw materials and project location. HENGDE will match the equipment to the complete factory configuration.