Mould entry
Position clean, prepared moulds for the confirmed pouring rhythm.
MOULD CIRCULATION & TRANSFER
Move moulds through pouring, curing, demoulding and return
The mould loop must be planned around curing time, mould quantity, rail layout, drive positions, cutting rhythm and safe factory movement.
Independent engineeringEquipment manufacturingProject delivery
COMPLETE MOULD-RETURN DRAWINGRail transfer, drive positions and return movement
HENGDEENGINEERED AS ONE SYSTEM
PourControlled mould entry
CurePlanned positions & time
ReturnConnected circulation loop
01
CIRCULATION LOOP
Design movement around the production sequence
Curing positions
Provide the quantity and movement logic required by the process.
Demoulding transfer
Move the billet safely toward peeling and cutting.
Return movement
Return moulds for cleaning, preparation and the next cycle.
02
FACTORY INTEGRATION
Rails, drives and layout must match the whole factory
Rail alignment
Foundation, straightness, level and safe clearances affect reliable movement.
Drive positions
Locate powered transfer around the approved sequence and access needs.
Cutting connection
Synchronize demoulding and billet delivery with the cutting section.
Future expansion
Reserve realistic space and utilities where later capacity growth is planned.
SEND YOUR PROJECT INFORMATION
Product, materials, capacity, factory and timeline
Let engineering review the complete factory need
Tell us the project country, target product, local raw materials, planned output and current project stage.
NEXT STEP
Prepare your project brief
Start with your product, materials and project location
Engineering can only configure a practical line when the real production conditions are visible.