MOULDING, CURING & CIRCULATION
Transfer and mould-circulation systems
Covers capacity-specific transfer-cart or mould-circulation sections without merging their models or parameters.
Compare line configurations
PRODUCTION-LINE CONFIGURATIONS
Configuration options by production line
The highlighted row matches the production line you selected. Final model, dimensions, quantity and power are confirmed during project engineering.
| Production line | Model | Dimensions | Qty. | Unit power | Total |
|---|---|---|---|---|---|
| 30 m³/day → | HLY-08 | 3500 mm per rail | 2 rails | ||
| 50 m³/day → | HDSD-001 | 6000 × 1080 × 470 mm per section | 3 functional sections | 1.5 kW each | 4.5 kW |
| 100 m³ → | |||||
| 300 m³/day → | HDBD2-001 | 1800 × 1080 × 400 mm | 6 | 3 kW | 18 kW |
USED IN THESE PRODUCTION LINES
Return to the corresponding capacity
30 m³/day
HLY-08 · 2 rails
Back to production-line equipment → Lightweight block family50 m³/day
HDSD-001 · 3 functional sections
Back to production-line equipment → Lightweight block production100 m³
HDBD2 · 5
Back to production-line equipment → High-output lightweight block line300 m³/day
HDBD2-001 · 6
Back to production-line equipment →SAME PROCESS STAGE
Explore other equipment in moulding, curing & circulation
Compare other equipment used at the same production stage. Final selection depends on the complete line configuration.
Demoulding line
Provides powered movement through the listed demoulding station.
Open equipment detail → Moulding, curing & circulationMould return line
Returns empty moulds for cleaning, preparation and the next pouring cycle.
Open equipment detail → Moulding, curing & circulationPouring line
Moves prepared moulds through the listed pouring position.
Open equipment detail →Discuss this equipment in a complete production line
Send the target product, planned output, raw materials and project location. HENGDE will match the equipment to the complete factory configuration.