PROJECT CASE

South Africa 200 m³/day EPS self-insulating block line

The project record identifies a 200 m³/day design basis for EPS self-insulating blocks and includes site media for mould circulation, cutting and finished products. Actual operating results depend on materials, formulation, shifts and site conditions.

Independent engineeringEquipment manufacturingProject delivery
REAL SOUTH AFRICA PRODUCTION MEDIAFinished products and connected equipment from the documented project file
Finished EPS self-insulating blocks at the South Africa project site
LUCA SMARTENGINEERED AS ONE SYSTEM
200 m³/dayProject design basis
EPS blocksTarget product
JohannesburgProject location
01
PROJECT-SITE EVIDENCE

Moulding, cutting and finished-product evidence

Connected EPS block production line at the South Africa project site REAL PROJECT-SITE PHOTO
01

Connected production line

The site overview shows production equipment installed along the transfer route.

EPS lightweight block cutting equipment at the South Africa project site REAL CUTTING EQUIPMENT
02

Cutting section

The cutting area is shown as part of the documented project rather than as a generic equipment image.

Mould circulation and fresh EPS material at the South Africa project site REAL MOULDING PROCESS
03

Mould circulation

Site media records moulds and fresh material within the production route.

Finished EPS self-insulating blocks after cutting at the South Africa site REAL FINISHED PRODUCT
04

Finished EPS blocks

The project file includes finished-product evidence for the specified EPS self-insulating block direction.

02
CAPACITY BASIS

A project basis is not a blanket output guarantee

The 200 m³/day figure belongs to the supplied project record. Final daily output depends on the confirmed formula, product sizes, mould cycle, curing, cutting rhythm, shifts and operating management.

PROJECT FACTS

Confirmed scope and record boundaries

Country / region
Johannesburg, South Africa
Product
EPS self-insulating blocks
Design capacity
200 m³/day project basis
Verified stage
Production-site media documented
Record date
Nov 2025

Equipment or functions confirmed by the public record

  • Connected production line
  • Cutting section
  • Mould circulation
  • Finished EPS blocks

Unconfirmed scope

Commercial scope beyond the photographed or dated record is not confirmed. Installation, commissioning and commercial production are not implied unless named as the verified stage.

PROJECT TIMELINE

Milestones supported by the available record

  1. Production-site media documented
  2. Earlier commercial milestones are not stated in the public record
NEXT STEP

Start with your product, materials and project location

Engineering can only configure a practical line when the real production conditions are visible.

Request an initial line review