FOAMING / AERATION & MIXING
No. 1 horizontal mixer
Combines the confirmed solids, water and route-specific lightweight constituent according to the approved batch sequence.
Compare line configurations
EQUIPMENT GALLERY
Real equipment photos and engineering views
Open any image to inspect the original full-size media.
STANDARD EQUIPMENT PARAMETERS
Model, dimensions, power, weight and function
Standard catalogue parameters. Capacity-specific quantity remains in the production-line configuration table below.
| Variant | Model | Dimensions | Rated power | Reference weight | Function |
|---|---|---|---|---|---|
| No. 1 horizontal spiral mixer · 1.5 m³ | EPSJB-02-1 | 3100 × 1550 × 1850 mm | 22 kW | 1300 kg | Spiral mixer for 1.2 m square moulds and 2.4 m long moulds. |
| No. 2 horizontal spiral mixer · 1.9 m³ | EPSJB-02-2 | 3300 × 1700 × 1950 mm | 22 kW | 1900 kg | Spiral mixer for 3.4 m long moulds. |
| No. 3 horizontal ceramsite mixer · 3.5 m³ | EPSJB-03 | 3900 × 2000 × 2100 mm | 55 kW | 2800 kg | Paddle mixer for the confirmed ceramsite route and 4.2 m long moulds. |
| No. 4 horizontal spiral mixer · 3.5 m³ | EPSJB-04 | 3900 × 2000 × 2100 mm | 55 kW | 3000 kg | Spiral mixer for the confirmed route and 4.2 m long moulds. |
Reference parameters describe the listed equipment model. Final interfaces, voltage, quantity and delivered configuration are confirmed in the project quotation and engineering drawings.
PRODUCTION-LINE CONFIGURATIONS
Configuration options by production line
The highlighted row matches the production line you selected. Final model, dimensions, quantity and power are confirmed during project engineering.
| Production line | Model | Dimensions | Qty. | Unit power | Total |
|---|---|---|---|---|---|
| 50 m³/day → | EPSA-1 | 2000 × 1200 × 1200 | 1 | 22 kW | 22 kW |
| 100 m³/day → | ADF-01 | 1.5 m³ | 1 | 22 kW | 22 kW |
| 200 m³/day → | EPSJB-01 | 1.5 m³ | 1 | 22 kW | 22 kW |
| 300 m³/day → | EPSJB-02 | 1.9 m³ | 1 | 22 kW | 22 kW |
| 400 m³/day → | EPSKH-02 | — | 1 | 22 kW | 22 kW |
| 600 m³/day → | EPSJB-04 | 3900 × 2000 × 2100 Internal Dimensions: 2580 × 1588 × 1700 | 1 | 22 kW | 22 kW |
| 1000 m³/day → | EPSJB-04 | 3900 × 2000 × 2100 internal chamber: 2580 × 1588 × 1700 | 1 | 22 kW | 22 kW |
| 80 m³/day → | EPSJB-02 | 3300 × 1700 × 1950 internal chamber: 2184 × 1288 × 1400 | 1 | 22 kW | 22 kW |
| 150 m³/day → | EPSJB-02 | 3300 × 1700 × 1950 internal chamber: 2184 × 1288 × 1400 | 1 | 22 kW | 22 kW |
| 200 m³/day → | EPSJB-02 | 3300 × 1700 × 1950 internal chamber: 2184 × 1288 × 1400 | 1 | 22 kW | 22 kW |
USED IN THESE PRODUCTION LINES
Return to the corresponding capacity
50 m³/day
EPSA-1 · 1
Back to production-line equipment → Lightweight block production100 m³/day
ADF-01 · 1
Back to production-line equipment → Lightweight block production200 m³/day
EPSJB-01 · 1
Back to production-line equipment → Lightweight block production300 m³/day
EPSJB-02 · 1
Back to production-line equipment → Lightweight block production400 m³/day
EPSKH-02 · 1
Back to production-line equipment → Lightweight block production600 m³/day
EPSJB-04 · 1
Back to production-line equipment → Lightweight block production1000 m³/day
EPSJB-04 · 1
Back to production-line equipment → Lightweight wall panel production80 m³/day
EPSJB-02 · 1
Back to production-line equipment → Lightweight wall panel production150 m³/day
EPSJB-02 · 1
Back to production-line equipment → Lightweight wall panel production200 m³/day
EPSJB-02 · 1
Back to production-line equipment →SAME PROCESS STAGE
Explore other equipment in foaming / aeration & mixing
Compare other equipment used at the same production stage. Final selection depends on the complete line configuration.
Physical foaming machine
Prepares physical foam for a confirmed CLC foam-concrete route; it is not an aluminium-powder NAAC machine.
Open equipment detail → Foaming / aeration & mixingPiston / screw air compressor
Supplies compressed air to the confirmed foaming and pneumatic scope; the 50 and 100 m³/day references use different variants.
Open equipment detail → Foaming / aeration & mixingOperating platform
Supports safe equipment access and the confirmed preparation layout; local fabrication follows the approved engineering drawing.
Open equipment detail →Discuss this equipment in a complete production line
Send the target product, planned output, raw materials and project location. HENGDE will match the equipment to the complete factory configuration.