CUTTING & FINISHING
Peeling machine with drive line
Removes the confirmed surface layer before dimensional cutting or finishing.
Compare line configurations
EQUIPMENT GALLERY
Real equipment photos and engineering views
Open any image to inspect the original full-size media.
STANDARD EQUIPMENT PARAMETERS
Model, dimensions, power, weight and function
Standard catalogue parameters. Capacity-specific quantity remains in the production-line configuration table below.
| Variant | Model | Dimensions | Rated power | Reference weight | Function |
|---|---|---|---|---|---|
| Twin-mould peeling machine | HDOSD1-001 | 3200 × 1000 × 2800 mm | 15 kW | 1200 kg | Removes the upper and lower surface layers from the green billet. |
| Square-mould peeling machine · 630 mm billet | HDOSD1-001 | 3000 × 1300 × 2100 mm | 22 kW | 900 kg | Removes the upper and lower surface layers from a 1230 × 1230 × 630 mm billet. |
Reference parameters describe the listed equipment model. Final interfaces, voltage, quantity and delivered configuration are confirmed in the project quotation and engineering drawings.
PRODUCTION-LINE CONFIGURATIONS
Configuration options by production line
The highlighted row matches the production line you selected. Final model, dimensions, quantity and power are confirmed during project engineering.
| Production line | Model | Dimensions | Qty. | Unit power | Total |
|---|---|---|---|---|---|
| 100 m³/day → | HDOSD1-001 | 3000＊1000＊2100 (including powered line) | 1 | 22 kW | 22 kW |
| 200 m³/day → | HDOSD1-001 | 3000＊1000＊2100 (including powered line) | 1 | 22 kW | 22 kW |
| 300 m³/day → | HDOSD1-001 | 3000＊1000＊2100 (including powered line) | 1 | 22 kW | 22 kW |
| 400 m³/day → | HDOSD1-001 | 3000＊1000＊2100 (including powered line) | 1 | 22 kW | 22 kW |
| 600 m³/day → | HDOSD1-001 | 3000 × 1000 × 2100 (including power cable) | 2 | 22 kW | 44 kW |
| 1000 m³/day → | HDOSD1-001 | 3000＊1000＊2100 (including powered line) | 3 | 22 kW | 66 kW |
| 500 m³/day → | HDOSD1-001 | 3000 × 1000 × 2100 | 2 | 22 kW | 44 kW |
USED IN THESE PRODUCTION LINES
Return to the corresponding capacity
100 m³/day
HDOSD1-001 · 1
Back to production-line equipment → Lightweight block production200 m³/day
HDOSD1-001 · 1
Back to production-line equipment → Lightweight block production300 m³/day
HDOSD1-001 · 1
Back to production-line equipment → Lightweight block production400 m³/day
HDOSD1-001 · 1
Back to production-line equipment → Lightweight block production600 m³/day
HDOSD1-001 · 2
Back to production-line equipment → Lightweight block production1000 m³/day
HDOSD1-001 · 3
Back to production-line equipment → Lightweight wall panel production500 m³/day
HDOSD1-001 · 2
Back to production-line equipment →SAME PROCESS STAGE
Explore other equipment in cutting & finishing
Compare other equipment used at the same production stage. Final selection depends on the complete line configuration.
Combined horizontal & vertical cutter
Performs the two listed cutting directions in the simplified 50 m³ reference.
Open equipment detail → Cutting & finishingGantry vertical cutter
Completes the vertical cutting stage in the 100 m³ configuration.
Open equipment detail → Cutting & finishingNine-station horizontal saw
Completes the listed multi-station horizontal cutting operation after the billet reaches the confirmed cutting condition.
Open equipment detail →Discuss this equipment in a complete production line
Send the target product, planned output, raw materials and project location. HENGDE will match the equipment to the complete factory configuration.