FOAMING / AERATION & MIXING
Physical foaming machine
Prepares physical foam for a confirmed CLC foam-concrete route; it is not an aluminium-powder NAAC machine.
Compare line configurations
EQUIPMENT GALLERY
Real equipment photos and engineering views
Open any image to inspect the original full-size media.
STANDARD EQUIPMENT PARAMETERS
Model, dimensions, power, weight and function
Standard catalogue parameters. Capacity-specific quantity remains in the production-line configuration table below.
| Variant | Model | Dimensions | Rated power | Reference weight | Function |
|---|---|---|---|---|---|
| Physical foaming machine | HDKWF1-001 | 1150 × 750 × 1140 mm | 7.5 kW | 310 kg | Generates preformed foam for the confirmed physical-foaming route. |
Reference parameters describe the listed equipment model. Final interfaces, voltage, quantity and delivered configuration are confirmed in the project quotation and engineering drawings.
PRODUCTION-LINE CONFIGURATIONS
Configuration options by production line
The highlighted row matches the production line you selected. Final model, dimensions, quantity and power are confirmed during project engineering.
| Production line | Model | Dimensions | Qty. | Unit power | Total |
|---|---|---|---|---|---|
| 30 m³/day → | HDKWF1-001 | 1150 × 750 × 1140 | 1 | 7.5 kW | 7.5 kW |
| 50 m³/day → | HDKWF1-001 | 1150 × 750 × 1140 | 1 | 7.5 kW | 7.5 kW |
| 100 m³/day → | HDKWF1-001 | 1150 × 750 × 1140 | 1 | 7.5 kW | 7.5 kW |
| 200 m³/day → | HDKWF1-001 | 1150 × 750 × 1140 | 1 | 7.5 kW | 7.5 kW |
| 300 m³/day → | HDKWF1-001 | 1150 × 750 × 1140 | 1 | 7.5 kW | 7.5 kW |
| 400 m³/day → | HDKWF1-001 | 1150 × 750 × 1140 | 1 | 7.5 kW | 7.5 kW |
| 600 m³/day → | HDKWF1-001 | 1150 × 750 × 1140 | 1 | 7.5 kW | 7.5 kW |
| 1000 m³/day → | HDKWF1-001 | 1150 × 750 × 1140 | 1 | 7.5 kW | 7.5 kW |
| 80 m³/day → | HDKWF1-001 | 1150 × 750 × 1140 | 1 | 7.5 kW | 7.5 kW |
| 150 m³/day → | HDKWF1-001 | 1150 × 750 × 1140 | 1 | 7.5 kW | 7.5 kW |
| 200 m³/day → | HDKWF1-001 | 1150 × 750 × 1140 | 1 | 7.5 kW | 7.5 kW |
USED IN THESE PRODUCTION LINES
Return to the corresponding capacity
30 m³/day
HDKWF1-001 · 1
Back to production-line equipment → Lightweight block production50 m³/day
HDKWF1-001 · 1
Back to production-line equipment → Lightweight block production100 m³/day
HDKWF1-001 · 1
Back to production-line equipment → Lightweight block production200 m³/day
HDKWF1-001 · 1
Back to production-line equipment → Lightweight block production300 m³/day
HDKWF1-001 · 1
Back to production-line equipment → Lightweight block production400 m³/day
HDKWF1-001 · 1
Back to production-line equipment → Lightweight block production600 m³/day
HDKWF1-001 · 1
Back to production-line equipment → Lightweight block production1000 m³/day
HDKWF1-001 · 1
Back to production-line equipment → Lightweight wall panel production80 m³/day
HDKWF1-001 · 1
Back to production-line equipment → Lightweight wall panel production150 m³/day
HDKWF1-001 · 1
Back to production-line equipment → Lightweight wall panel production200 m³/day
HDKWF1-001 · 1
Back to production-line equipment →SAME PROCESS STAGE
Explore other equipment in foaming / aeration & mixing
Compare other equipment used at the same production stage. Final selection depends on the complete line configuration.
Piston / screw air compressor
Supplies compressed air to the confirmed foaming and pneumatic scope; the 50 and 100 m³/day references use different variants.
Open equipment detail → Foaming / aeration & mixingOperating platform
Supports safe equipment access and the confirmed preparation layout; local fabrication follows the approved engineering drawing.
Open equipment detail → Foaming / aeration & mixingHorizontal mixer variants
Combines the confirmed solids, water and route-specific lightweight constituent according to the approved batch sequence.
Open equipment detail →Discuss this equipment in a complete production line
Send the target product, planned output, raw materials and project location. HENGDE will match the equipment to the complete factory configuration.