FOAMING / AERATION & MIXING
Premixer
Prepares selected materials before final mixing in the high-output reference route.
Compare line configurations
EQUIPMENT GALLERY
Real equipment photos and engineering views
Open any image to inspect the original full-size media.
STANDARD EQUIPMENT PARAMETERS
Model, dimensions, power, weight and function
Standard catalogue parameters. Capacity-specific quantity remains in the production-line configuration table below.
| Variant | Model | Dimensions | Rated power | Reference weight | Function |
|---|---|---|---|---|---|
| Large vertical reaction mixer · 2.0 m³ | HDLS-001 | Ø1500 × H2700 mm | 22 kW | 800 kg | Vertical reaction mixer for the confirmed 3.4 m long-mould route. |
| Small vertical reaction mixer · 0.9 m³ | HDLS-002 | Ø1200 × H2300 mm | 11 kW | 550 kg | Vertical reaction mixer for the confirmed 1.2 m square-mould route. |
Reference parameters describe the listed equipment model. Final interfaces, voltage, quantity and delivered configuration are confirmed in the project quotation and engineering drawings.
PRODUCTION-LINE CONFIGURATIONS
Configuration options by production line
The highlighted row matches the production line you selected. Final model, dimensions, quantity and power are confirmed during project engineering.
| Production line | Model | Dimensions | Qty. | Unit power | Total |
|---|---|---|---|---|---|
| 400 m³/day → | HDLS-001 | Ø1500 × H2700 | 1 | 22 kW | 22 kW |
| 600 m³/day → | HDLS-002 | Diameter 1200 mm × Height 2300 mm | 1 | 11 kW | 11 kW |
USED IN THESE PRODUCTION LINES
Return to the corresponding capacity
SAME PROCESS STAGE
Explore other equipment in foaming / aeration & mixing
Compare other equipment used at the same production stage. Final selection depends on the complete line configuration.
Physical foaming machine
Prepares physical foam for a confirmed CLC foam-concrete route; it is not an aluminium-powder NAAC machine.
Open equipment detail → Foaming / aeration & mixingPiston / screw air compressor
Supplies compressed air to the confirmed foaming and pneumatic scope; the 50 and 100 m³/day references use different variants.
Open equipment detail → Foaming / aeration & mixingOperating platform
Supports safe equipment access and the confirmed preparation layout; local fabrication follows the approved engineering drawing.
Open equipment detail →Discuss this equipment in a complete production line
Send the target product, planned output, raw materials and project location. HENGDE will match the equipment to the complete factory configuration.