MOULDING, CURING & CIRCULATION
Manual transfer car
Covers capacity-specific transfer-cart or mould-circulation sections without merging their models or parameters.
Compare line configurations
EQUIPMENT GALLERY
Real equipment photos and engineering views
Open any image to inspect the original full-size media.
STANDARD EQUIPMENT PARAMETERS
Model, dimensions, power, weight and function
Standard catalogue parameters. Capacity-specific quantity remains in the production-line configuration table below.
| Variant | Model | Dimensions | Rated power | Reference weight | Function |
|---|---|---|---|---|---|
| 3 m powered transfer car | HDBD2-001 | 3000 × 1500 × 470 mm | 3 kW | 750 kg | Transfers 2.4 m long moulds between connected production stations. |
| 4 m powered transfer car | HDBD2-002 | 4000 × 1500 × 470 mm | 3 kW | 950 kg | Transfers 3.4 m long moulds between connected production stations. |
| 1.8 m powered transfer car | HDBD2-003 | 1800 × 1080 × 470 mm | 0.74 kW | 250 kg | Transfers 1.2 m square moulds between connected production stations. |
| 1.8 m non-powered transfer car | HDBD2-004 | 1500 × 1600 × 410 mm | — | 90 kg | Transfers 1.2 m square moulds without an onboard drive. |
Reference parameters describe the listed equipment model. Final interfaces, voltage, quantity and delivered configuration are confirmed in the project quotation and engineering drawings.
PRODUCTION-LINE CONFIGURATIONS
Configuration options by production line
The highlighted row matches the production line you selected. Final model, dimensions, quantity and power are confirmed during project engineering.
| Production line | Model | Dimensions | Qty. | Unit power | Total |
|---|---|---|---|---|---|
| 100 m³/day → | HDBAS-001 | 1500 × 1080 × 40 | 5 | — | — |
| 200 m³/day → | HDBD2-001 | 1800 × 1080 × 400 | 5 | 3 kW | 15 kW |
| 300 m³/day → | HDBD2-001 | 1800 × 1080 × 400 | 6 | 3 kW | 18 kW |
| 400 m³/day → | HDBD2-001 | 1800 × 1080 × 400 | 7 | 3 kW | 21 kW |
| 600 m³/day → | HDBD2-001 | 1800 × 1080 × 400 | 10 | 1.2 kW | 12 kW |
| 1000 m³/day → | HDBD2-001 | 1800 × 1080 × 400 | 10 | 1.2 kW | 12 kW |
USED IN THESE PRODUCTION LINES
Return to the corresponding capacity
100 m³/day
HDBAS-001 · 5
Back to production-line equipment → Lightweight block production200 m³/day
HDBD2-001 · 5
Back to production-line equipment → Lightweight block production300 m³/day
HDBD2-001 · 6
Back to production-line equipment → Lightweight block production400 m³/day
HDBD2-001 · 7
Back to production-line equipment → Lightweight block production600 m³/day
HDBD2-001 · 10
Back to production-line equipment → Lightweight block production1000 m³/day
HDBD2-001 · 10
Back to production-line equipment →SAME PROCESS STAGE
Explore other equipment in moulding, curing & circulation
Compare other equipment used at the same production stage. Final selection depends on the complete line configuration.
Demoulding line
Provides powered movement through the listed demoulding station.
Open equipment detail → Moulding, curing & circulationMould return line
Returns empty moulds for cleaning, preparation and the next pouring cycle.
Open equipment detail → Moulding, curing & circulationPouring line
Moves prepared moulds through the listed pouring position.
Open equipment detail →Discuss this equipment in a complete production line
Send the target product, planned output, raw materials and project location. HENGDE will match the equipment to the complete factory configuration.