FOAMING / AERATION & MIXING
Piston air compressor
Supplies compressed air to the confirmed foaming and pneumatic scope; the 50 and 100 m³/day references use different variants.
Compare line configurations
STANDARD EQUIPMENT PARAMETERS
Model, dimensions, power, weight and function
Standard catalogue parameters. Capacity-specific quantity remains in the production-line configuration table below.
| Variant | Model | Dimensions | Rated power | Reference weight | Function |
|---|---|---|---|---|---|
| Screw air compressor | HDKY-001 | 1500 × 500 × 2000 mm | 15 kW | 160 kg | Supplies compressed air to the configured pneumatic and foaming scope. |
| Piston air compressor | HDKY-002 | 1500 × 500 × 1050 mm | 7.5 kW | 150 kg | Supplies compressed air to the configured pneumatic and foaming scope. |
Reference parameters describe the listed equipment model. Final interfaces, voltage, quantity and delivered configuration are confirmed in the project quotation and engineering drawings.
PRODUCTION-LINE CONFIGURATIONS
Configuration options by production line
The highlighted row matches the production line you selected. Final model, dimensions, quantity and power are confirmed during project engineering.
| Production line | Model | Dimensions | Qty. | Unit power | Total |
|---|---|---|---|---|---|
| 50 m³/day → | HDKY-001 | — | 1 | 7.5 kW | 7.5 kW |
| 100 m³/day → | HDKY-001 | — | 1 | 7.5 kW | 7.5 kW |
| 200 m³/day → | HDKY-001 | L1500 × W500 × H2000 mm, air receiver0.8 m³*1 | 1 | 15 kW | 15 kW |
| 300 m³/day → | HDKY-001 | L1500 × W500 × H2000 mm, air receiver0.8 m³*1 | 1 | 15 kW | 15 kW |
| 400 m³/day → | HDKY-001 | L1500 × W500 × H2000 mm, air receiver0.8 m³*1 | 1 | 15 kW | 15 kW |
| 600 m³/day → | HDKY-001 | Length 1500 × Width 500 × Height 2000 mm Air tank: 0.8 cubic meters × 1 | 1 | 15 kW | 15 kW |
| 1000 m³/day → | HDKY-001 | L1500 × W500 × H2000 mm, air receiver0.8 m³*1 | 1 | 15 kW | 15 kW |
| 80 m³/day → | HDKY-001 | L1500 × W500 × H2000 mm, air receiver0.8 m³*1 | 1 | 15 kW | 15 kW |
| 150 m³/day → | HDKY-001 | L1500 × W500 × H2000 mm, air receiver0.8 m³*1 | 1 | 15 kW | 15 kW |
| 200 m³/day → | HDKY-001 | L1500 × W500 × H2000 mm, air receiver0.8 m³*1 | 1 | 15 kW | 15 kW |
| 500 m³/day → | HDKY-001 | 1500 × 500 × 2000 mm; one 0.8 m³ air tank | 1 | 15 kW | 15 kW |
USED IN THESE PRODUCTION LINES
Return to the corresponding capacity
50 m³/day
HDKY-001 · 1
Back to production-line equipment → Lightweight block production100 m³/day
HDKY-001 · 1
Back to production-line equipment → Lightweight block production200 m³/day
HDKY-001 · 1
Back to production-line equipment → Lightweight block production300 m³/day
HDKY-001 · 1
Back to production-line equipment → Lightweight block production400 m³/day
HDKY-001 · 1
Back to production-line equipment → Lightweight block production600 m³/day
HDKY-001 · 1
Back to production-line equipment → Lightweight block production1000 m³/day
HDKY-001 · 1
Back to production-line equipment → Lightweight wall panel production80 m³/day
HDKY-001 · 1
Back to production-line equipment → Lightweight wall panel production150 m³/day
HDKY-001 · 1
Back to production-line equipment → Lightweight wall panel production200 m³/day
HDKY-001 · 1
Back to production-line equipment → Lightweight wall panel production500 m³/day
HDKY-001 · 1
Back to production-line equipment →SAME PROCESS STAGE
Explore other equipment in foaming / aeration & mixing
Compare other equipment used at the same production stage. Final selection depends on the complete line configuration.
Physical foaming machine
Prepares physical foam for a confirmed CLC foam-concrete route; it is not an aluminium-powder NAAC machine.
Open equipment detail → Foaming / aeration & mixingOperating platform
Supports safe equipment access and the confirmed preparation layout; local fabrication follows the approved engineering drawing.
Open equipment detail → Foaming / aeration & mixingHorizontal mixer variants
Combines the confirmed solids, water and route-specific lightweight constituent according to the approved batch sequence.
Open equipment detail →Discuss this equipment in a complete production line
Send the target product, planned output, raw materials and project location. HENGDE will match the equipment to the complete factory configuration.