MOULDING, CURING & CIRCULATION
Twin cutting drive lines
Connects billet movement through the horizontal and vertical cutting section.
Compare line configurations
STANDARD EQUIPMENT PARAMETERS
Model, dimensions, power, weight and function
The current verified BOM does not include a separate catalogue weight for this equipment family. Missing values are left for engineering confirmation.
| Variant | Model | Dimensions | Rated power | Reference weight | Function |
|---|---|---|---|---|---|
| 80 m³/day configuration | HDZD-001 | 12 m × 1.1 m | 3 kW | — | Connects billet movement through the horizontal and vertical cutting section. |
| 500 m³/day configuration | HDZD-001 | 12 m × 1.1 m | 3 kW | — | Connects billet movement through the horizontal and vertical cutting section. |
Reference parameters describe the listed equipment model. Final interfaces, voltage, quantity and delivered configuration are confirmed in the project quotation and engineering drawings.
PRODUCTION-LINE CONFIGURATIONS
Configuration options by production line
The highlighted row matches the production line you selected. Final model, dimensions, quantity and power are confirmed during project engineering.
| Production line | Model | Dimensions | Qty. | Unit power | Total |
|---|---|---|---|---|---|
| 80 m³/day → | HDZD-001 | 12 m × 1.1 m | 1 | 3 kW | 3 kW |
| 150 m³/day → | HDZD-001 | 12 m × 1.1 m | 1 | 3 kW | 3 kW |
| 200 m³/day → | HDZD-001 | 12 m × 1.1 m | 2 | 3 kW | 6 kW |
| 500 m³/day → | HDZD-001 | 12 m × 1.1 m | 4 | 3 kW | 12 kW |
USED IN THESE PRODUCTION LINES
Return to the corresponding capacity
80 m³/day
HDZD-001 · 1
Back to production-line equipment → Lightweight wall panel production150 m³/day
HDZD-001 · 1
Back to production-line equipment → Lightweight wall panel production200 m³/day
HDZD-001 · 2
Back to production-line equipment → Lightweight wall panel production500 m³/day
HDZD-001 · 4
Back to production-line equipment →SAME PROCESS STAGE
Explore other equipment in moulding, curing & circulation
Compare other equipment used at the same production stage. Final selection depends on the complete line configuration.
Transfer and mould-circulation systems
Covers capacity-specific transfer-cart or mould-circulation sections without merging their models or parameters.
Open equipment detail → Moulding, curing & circulationDemoulding line
Provides powered movement through the listed demoulding station.
Open equipment detail → Moulding, curing & circulationMould return line
Returns empty moulds for cleaning, preparation and the next pouring cycle.
Open equipment detail →Discuss this equipment in a complete production line
Send the target product, planned output, raw materials and project location. HENGDE will match the equipment to the complete factory configuration.