EQUIPMENT FAMILY IMAGE Preparation & metering
Aggregate mixing & dosing station
Prepares and meters the confirmed aggregate stream for the connected batch.
View device and line configurations →PRODUCTION EQUIPMENT
Lightweight Block & Wall Panel Production Equipment
Explore HENGDE equipment for batching, foaming, mixing, moulding, cutting, handling, stacking and PLC control systems.
Preparation & MeteringMaterial handling
Foaming / MixingProcess equipment
Moulding & CuringProduct forming
Cutting & FinishingDimensional processing
Handling & PLCLine coordination
Browse Equipment by Production Process
Preparation & metering
EQUIPMENT FAMILY IMAGE 
Preparation & metering
Automatic discharging line
Moves the confirmed carrier or product out of the connected station.
HDZD-002View device and line configurations →
Preparation & metering
Automatic feeding line
Moves confirmed material or carriers through the listed automatic feed stage.
HDZD-001View device and line configurations →
Preparation & metering
Belt conveyor
Connects compatible bulk-material feeding with the preparation and metering stage.
HDPDA-001 · HDKJ-001View device and line configurations →
Preparation & metering
Conveyor-linked metering hopper
Buffers and meters compatible material between conveying and batch preparation.
HDSS-001 · HDFL-001View device and line configurations →
Preparation & metering
Dosing hopper
Buffers and meters confirmed batch material before mixing.
View device and line configurations →
Preparation & metering
Operation platform
Supports the feeding, metering and mixing arrangement; approved engineering drawings specify customer-supplied steelwork.
View device and line configurations →
Preparation & metering
Powder metering system
Measures the confirmed powder input for each production batch.
HDFL-001View device and line configurations →
Preparation & metering
Screw feeder
Moves compatible powder materials from storage toward the metering section.
HDSL-001View device and line configurations →
Preparation & metering
Water metering system
Stores and releases the confirmed water quantity for the controlled batch.
HDSL-001View device and line configurations →Foaming / aeration & mixing
Foaming / aeration & mixing
Horizontal mixer variants
Combines the confirmed solids, water and route-specific lightweight constituent according to the approved batch sequence.
EPSA-1 · ADF-01 · EPSJB-01 · EPSJB-02 · EPSKH-02 · EPSJB-04View device and line configurations →
Foaming / aeration & mixing
Physical foaming machine
Prepares physical foam for a confirmed CLC foam-concrete route; it is not an aluminium-powder NAAC machine.
HDKWF1-001View device and line configurations →
Foaming / aeration & mixing
Piston / screw air compressor
Supplies compressed air to the confirmed foaming and pneumatic scope; the 50 and 100 m³/day references use different variants.
HDKY-001View device and line configurations →
Foaming / aeration & mixing
Powered storage bin
Buffers prepared material while supporting the connected batch rhythm.
HDSU-2View device and line configurations →
Foaming / aeration & mixing
Premixer
Prepares selected materials before final mixing in the high-output reference route.
HDLS-001 · HDLS-002View device and line configurations →
Foaming / aeration & mixing
Slurry pump
Transfers compatible mixed slurry to the confirmed pouring position.
HDBD2-005View device and line configurations →Moulding, curing & circulation
Moulding, curing & circulation
Demoulding line
Provides powered movement through the listed demoulding station.
TM-001View device and line configurations →
Moulding, curing & circulation
Mould return line
Returns empty moulds for cleaning, preparation and the next pouring cycle.
HM-001View device and line configurations →
Moulding, curing & circulation
Pouring line
Moves prepared moulds through the listed pouring position.
JZ-001View device and line configurations →
PRODUCTION CONTEXT Moulding, curing & circulation
Twin cutting drive lines
Connects billet movement through the horizontal and vertical cutting section.
HDZD-001View device and line configurations →Cutting & finishing
Cutting & finishing
Combined horizontal & vertical cutter
Performs the two listed cutting directions in the simplified 50 m³ reference.
HDSXZ-01-01View device and line configurations →
Cutting & finishing
Gantry vertical cutter
Completes the vertical cutting stage in the 100 m³ configuration.
HDSHM1-01View device and line configurations →
Cutting & finishing
Multi-panel slotting machine
Creates the confirmed edge groove or joint profile on multiple panels.
HDKG-C01View device and line configurations →
Cutting & finishing
Nine-station horizontal saw
Completes the listed multi-station horizontal cutting operation after the billet reaches the confirmed cutting condition.
View device and line configurations →
Cutting & finishing
Peeling machine
Removes the confirmed surface layer before dimensional cutting or finishing.
HDOSD1-001View device and line configurations →
Cutting & finishing
Twin-mould three-station CNC gantry vertical saw
Completes the second cutting direction for the listed twin-mould route.
HDSQ1-003View device and line configurations →Handling & stacking
Handling & stacking
Block lifter
Lifts or grips blocks according to the confirmed product condition and transfer sequence.
HDEB2-1 · HDTH-005View device and line configurations →
Handling & stacking
Demoulding crane
Separates and lifts the mould or green product at the confirmed demoulding condition.
HDKHG-001 · HDKDR-001View device and line configurations →
Handling & stacking
Demoulding lifting tool
Separates the mould assembly and moves the green product according to the approved demoulding sequence.
HDTH-003 · HDTH-001View device and line configurations →
Handling & stacking
Lifting & stacking machine
Lifts and stacks finished product according to the approved handling pattern.
HDTH-006View device and line configurations →
Handling & stacking
Product turning machine
Turns the product when the confirmed cutting or finishing sequence requires a change of orientation.
HDWEGH1-001View device and line configurations →
Handling & stacking
Reinforcement rod insertion/removal machine
Positions and removes the rod system for the confirmed reinforced wall-panel route.
HDTH-004View device and line configurations →
Handling & stacking
Wall-panel and block clamp
Clamps and moves finished or prepared products around the confirmed grip, condition and stacking method.
HDDKG-N01View device and line configurations →
Handling & stacking
Wall-panel transfer car
Transfers moulds or products between the listed production stages.
HDBD-001View device and line configurations →PLC, electrical & tooling
PLC, electrical & tooling
Block mould variants
Forms the lightweight block billet; the delivered geometry follows the selected product.
HDCM1-002 · HDCM1-001View device and line configurations →
REAL EQUIPMENT PHOTO PLC, electrical & tooling
Blower with 8 m air hose
Provides the listed auxiliary air-cleaning or process support function.
View device and line configurations →
PLC, electrical & tooling
Complete mould set
Forms the listed panel or block billet; final geometry follows the confirmed product.
HDSD2-001View device and line configurations →
PLC, electrical & tooling
Foaming-machine control cabinet
Controls the delivered physical-foaming equipment scope.
HDCB-001 · HDCBD1-001View device and line configurations →
PLC, electrical & tooling
Mould base
Supports the mould and transfer sequence in the listed tooling scope.
HDCM1-002View device and line configurations →
PLC, electrical & tooling
PLC main control cabinet
Coordinates the confirmed line sequence, interlocks, commands and alarms.
HDKZ1-001 · HDGF-001View device and line configurations →
PRODUCTION CONTEXT PLC, electrical & tooling
Receiving plate
Receives and supports the product during the confirmed handling sequence.
HDSA-001View device and line configurations →
REAL EQUIPMENT PHOTO PLC, electrical & tooling
Reinforcement rods
Provides the listed insert tooling; diameter and arrangement follow the confirmed panel design.
View device and line configurations →
PLC, electrical & tooling
Remote-control module
Provides the listed remote command functions for the confirmed controls scope.
IMPORTView device and line configurations →
ENGINEERING DRAWING PLC, electrical & tooling
Rod frame
Carries the listed reinforcement rods for the confirmed panel route.
View device and line configurations →
REAL EQUIPMENT PHOTO PLC, electrical & tooling
Rod rack
Stores or positions the rod system in the listed tooling scope.
View device and line configurations →
REAL EQUIPMENT PHOTO PLC, electrical & tooling
Rod-frame transfer cart
Moves the rod-frame tooling through the confirmed panel-production sequence.
View device and line configurations →
PLC, electrical & tooling
Transfer-car control cabinet
Controls the corresponding transfer-car movement and limits.
View device and line configurations →